B-190 is a carefully designed pergola with modern lines. A solid aluminium structure with orientable slats, offering the best resistance against snow and rain loads, etc.
It has endless modulation possibilities, which added to the quality of its materials makes it the perfect solution for solar protection, ideal for adapting and enhancing every architectural style where.
Orientable slats, from 0° to 135°.
Tailored manufacturing.
165×40 mm
(type 4 columns)
High: 3,000 mm, wide: 4,200 mm, long: 6,200 mm.
Free-flow drainage or slab channeling.
Hidden drains and electrical lines.
6063 T5 aluminium, stainless steel and polyacetal (POM).
A 24Vdc motor (low voltage) provides better safety against electric shock. Additional earthing protection.
In accordance with specifications for Qualicoat, Qualideco and Qualanod. RAL colour, anodized or wood effect finishes are available.
A registered system that works against sideways rain and prevents direct and/or reflected light from going through the joints between the slats and the frame.
There is a rubber sealing integrated into the slats, which ensures the watertightness of the pergola, since it does not allow water into the joints between slats.
At the same time, it cancels the noise created between the slats due to the vibration caused by wind.
The pergola can be operated only by motorisation, using a 24 Vdc motor. This will also ensure your safety against electric shock, with the additional safety of earthing protection.
The motorised element is discretely hidden between the slats and the frame, promoting the beauty of the pergola.
The design of the P-190 and P-150 slats allows rainwater to be collected in order to reuse it. Water is channelled towards the lateral frames, without the need to slope to drain.
In this way, it also helps to protect the furniture located under the pergola, because it prevents stored rainwater from falling onto your furniture once the slats are moved again, using different sensors.
In the case of free-flow drainage, water is expelled freely by means of two columns towards the surface where the pergola is mounted, through the holes intended for that use.
The channeling integrated inside allows rainwater to be evacuated for later recovery. During the construction of the slab, prior to mounting the pergola, the pre-installation of draining pipes must be taken into account.
Our Wind Screen range, besides offering protection and a higher degree of privacy, allow sunlight to keep entering through the upper part of the pergola. It is a blind, designed especially for outdoors use which, thanks to its system of zipper rails, can tolerate strong gusts of wind. The opening and closing of the Wind Screen can be done through the same automatic system that controls the operation of the pergola, ensuring a perfect closing.
With a great aesthetic value, and thanks to the design of the new boxes, the Wind Screen adapts perfectly to the most demanding requirements. But the level of customisation of your blind will be unlimited, thanks to the wide range of fabrics and the many colours and finishes offered by Saxun.
Standard UNE-EN 13659:2004+A class 6 (aprox. 112 km/h) tested up to 190 km/h without breaking within test bench parameters.
Our pergolas, just like the rest of our products, are subjected to a variety of tests in our labs in order to check their resistance and behaviour under every type of circumstance.
≤100 kg/m2 (including its own weight) Standard EN-1999 EUROCODE 9 aluminium structures project..
Tests done following the requirements of International Standards involving parameters such as wind resistance and rainfall or snowfall demonstrate the excellent performance of our bioclimatic pergolas against the most adverse conditions.
Standard UNE-EN 12056-3, (0,03 l/s max.) constant heavy rain aprox. 108 l.m2/h (structures + slats).
