Bioclimatic Pergola B-150

BIOCLIMATIC PERGOLA B-150

 

The new B-150 is a model with similar characteristics to B-190. It is designed with clean lines which lets it adapt to any architectural style.

This pergola has great advantages when it comes to installation. The mounting time is minimised, making it a quick and easy task, since some profiles simply clip into place and do not need screwing.

The mounting of the slats is also smoother, thanks to the retracting spring-loaded.

Characteristics

Breathable, watertight cover

Orientable slats, from 0° to 135°.

Different mounting types

Tailored manufacturing.

Working slat dimensions

150×35 mm

Maximum dimensions

(type 4 columns)
High: 3,000 mm, wide: 3,600 mm, long: 5,000 mm.

Registered perimeter sealing system against sideways rain and vibration due to gusts of wind

Easy mounting of components

The collector and adapter clip into place, without screws. The slat can also be installed quickly thanks to the retracting spring-loaded shaft.

Channeling of rainwater

Free-flow drainage or slab channeling.

Materials

6063 T5 aluminium, stainless steel and nylon fv UV filter.

Finishes

In accordance with specifications for Qualicoat, Qualideco and Qualanod. RAL colour, anodized or imitation wood finishes are available.

External motorisation

The motor, which works at 24Vdc (low voltage), also provides better safety against electric shock.

Registered perimeter sealing

A registered system that works against sideways rain and prevents direct and/or reflected light from going through the joints between the slats and the frame.

Component optimisation

This model’s duplex installation, as well as the grouping of pergolas, allow columns to be shared, resulting in a very efficient design.

External motorisation

The motor in the P-150 model is located in the upper part of the pergola, on the outside, so it is not visible from inside.

Its IP67 ensures a complete guarantee with regard to outdoor exposure, against rain and suspended particles such as dust, etc. This arrangement makes it possible to share a motor when there are groups of pergolas, or in duplex pergolas.

COLLECTING
RAINWATER

The design of the P-190 and P-150 slats allows rainwater to be collected in order to reuse it. Water is channelled towards the lateral frames, without the need to slope to drain.

In this way, it also helps to protect the furniture located under the pergola, because it prevents stored rainwater from falling onto your furniture once the slats are moved again, using different sensors.

FREE DRAINAGE

In the case of free-flow drainage, water is expelled freely by means of two columns towards the surface where the pergola is mounted, through the holes intended for that use.

SLAB CHANNELING

The channeling integrated inside allows rainwater to be evacuated for later recovery. During the construction of the slab, prior to mounting the pergola, the pre-installation of draining pipes must be taken into account.

windscreen

Wind Screen

Our Wind Screen range, besides offering protection and a higher degree of privacy, allow sunlight to keep entering through the upper part of the pergola. It is a blind, designed especially for outdoors use which, thanks to its system of zipper rails, can tolerate strong gusts of wind. The opening and closing of the Wind Screen can be done through the same automatic system that controls the operation of the pergola, ensuring a perfect closing.

With a great aesthetic value, and thanks to the design of the new boxes, the Wind Screen adapts perfectly to the most demanding requirements. But the level of customisation of your blind will be unlimited, thanks to the wide range of fabrics and the many colours and finishes offered by Saxun.

TESTS

Tests done following the requirements of International Standards involving parameters such as wind resistance and rainfall or snowfall demonstrate the excellent performance of our bioclimatic pergolas against the most adverse conditions.

Our pergolas, just like the rest of our products, are subjected to a variety of tests in our labs in order to check their resistance and behaviour under every type of circumstance.

≤65 kg/m2 (including its own weight) Standard EN-1999 EUROCODE 9 aluminium structures project.

Tests done following the requirements of International Standards involving parameters such as wind resistance and rainfall or snowfall demonstrate the excellent performance of our bioclimatic pergolas against the most adverse conditions.

Standard UNE-EN 12056-3, (0,03 l/s max.) constant heavy rain aprox. 108 l.m2/h (structures + slats).